Philips LivingWhites Fiche électrique française - Manual (Page 8)

8
The Philips warranty is invalid if:
- Anything has been changed, crossed out, deleted or rendered illegible on the purchase docket or
product description.
- The failure is caused by damage, faulty connections or abuse.
- A defect is caused by extreme circumstances not inherent to the LivingWhites plug, for example,
lightning, flooding, fire, incorrect use or negligence.
- The LivingWhites plug has been opened or disassembled.
Cleaning and maintenance:
Remove the plug from the wall socket.
To avoid scratching, the LivingWhites plug should only be cleaned with a soft dry cloth.
Do not use cleaning agents.
Safety instructions:
o Keep the LivingWhites plug away from liquids and humidity.
o The LivingWhites luminaire control plug is for indoor use only. Do not use in wet locations, e.g.
bathrooms or outdoors.
o The LivingWhites luminaire control plug is not a toy designed to be played with by children.
o Do not place on hot surfaces
o For safety reasons and under the terms of the warranty, the LivingWhites luminaire control
plug must not be opened.
Environment:
If you need to discard the appliance, dispose of it in accordance with instructions from the local
authority.
Technical specifications:
Input: 200 - 240 V
50 Hz
Power consumption:
Standby: <0.5 W
Max: 300 W
Wireless specification:
Wireless RF mode frequency band: 2405~2475 MHz
Wireless communications protocol: IEEE 802.15.4
Operating channels: channels 11, 15, 20 or 25
Environmental specification:
Temperature (operation):
0...40 °C
Temperature (Storage): -25...60 °C
Relative humidity: 5...95 % non condensing