Brother HL-5470DWT - Manual (Page 104)

98
Options
4
SO-DIMM
4
The machine has 128 MB of standard memory and one slot for optional memory expansion. You can increase
the memory up to a maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory
Module).
SO-DIMM types
4
For information regarding memory for your Brother machine please visit us at:
http://www.brother-usa.com/support/memory/
In general, the SO-DIMM must have the following specifications:
Type: 144-pin and 16-bit output
CAS latency: 4
Clock frequency: 267 MHz (533 Mb/S/Pin) or more
Capacity: 256 MB
Height: 30.0 mm (1.18 in.)
DRAM type: DDR2 SDRAM
Note
• There might be some SO-DIMMs that will not work with the machine.
• For more information, call the dealer you bought the machine from or Brother Customer Service.