Brother HL-5470DWT - Manual (Page 132)

126
Routine Maintenance
5
Packing and shipping the machine
5
WARNING
If you use a Lower Tray, DO NOT carry the machine with the Lower Tray as you may be injured or cause
damage to the machine because it is not attached to the Lower Tray.
Note
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
• For HL-5470DWT and HL-6180DWT users, the lower tray and the machine should be packed separately
into each original packing box and then pack them into the largest original box.
a
Turn off the machine’s power switch. Leave the machine turned off for at least 10 minutes to cool down.
b Disconnect all the cables, and then unplug the power cord from the AC power outlet.
c Put the packing material (1) into the carton.
REAR
1
FRONT