Brother HL-5470DWT - Manual (Page 27)

21
Printing Methods
1
Manual duplex printing
1
The BR-Script printer driver for Windows
®
does not support manual duplex printing.
If you are using the Macintosh Printer Driver, see Manual Duplex Printing uu page 64.
Manual duplex printing with the Windows
®
printer driver
1
a Choose the following settings from each drop-down list of the printer driver.
 Paper Size
You can use all the paper sizes specified for the tray you are using.
 Media Type
You can use all the media types that are specified for the tray you are using, except envelopes and
labels which have only one print side.
 Paper Source
 Duplex / Booklet
 Duplex Type in Duplex Settings
There are four options for each orientation. (See Duplex / Booklet uu page 29.)
 Binding Offset in Duplex Settings
You can specify the offset for binding. (See Duplex / Booklet uu page 29.)
For any other settings, see Driver and Software in Chapter 2.
b Send the print data to the machine. The machine will print all the even-numbered pages on one side of
the paper first. Then, the Windows
®
driver instructs you (with a pop-up message) to reinsert the paper
to print the odd-numbered pages.
Note
Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not
recommended.
Tray1 MP Tray Tray2 (if available)
Duplex (Manual)