Buffalo Technology TeraStation HD-HTGL/R5 - Manual (Page 7)

7
The TeraStation’s Ethernet port will automatically adjust to use either a Crossover or Patch cable,
so you may connect the TeraStation to your network with either type of Ethernet cable. Buffalo
Technology.doesn’t.recommend.connecting.the.TeraStation.directly.to.a.PC.
Verify.that.the.LINK/ACT LED.on.the.front.of.TeraStation.is.lit.(see.page 6’s picture). If it’s lit, go to
page 8 to continue setting up TeraStation. If the LINK/ACT LED is still not lit, try the suggestions
below to verify that you’re not suffering from common setup problems.
Having problems? Make sure that:
•.. the TeraStation and the router, hub or switch are both powered on,
•.. the Ethernet cable is securely plugged in at both ends, and
• .. the Ethernet cable is not damaged. Verify this by trying a different Ethernet cable. .
If problems persist, contact our 24/7 technical support at (866) 75-610.(USA.&.Canada.only)...
Technical Support in Europe is available between the hours of 9am - 6pm (GMT) Monday through
Thursday and 9am-4:30 pm (GMT) Friday for this product. Customers in Europe can obtain
Technical Support using the following information: Email: [email protected] | Web:
www.buffalo-technology.com
TeraStation Quick Setup