Philips Éveil Lumière User Manual

Page 15

Advertising
background image

Problem

Solution

The light wakes me too

late

Perhaps the appliance is positioned at a lower level than your head.

Make sure the appliance is located at a height at which the light is not

blocked by your bed, duvet or pillow. Also make sure the appliance is

not placed too far away.

The lamp flashes.

Perhaps there has been a power failure. It is normal for the lamp to

flash after a power failure.
Perhaps the appliance is not suitable for the voltage to which it is

connected. Make sure that the voltage indicated on the appliance

corresponds to the local mains voltage.

The iPod/iPhone was

not charged after I

placed it in the iPod/

iPhone station.

Perhaps you did not place the iPod/iPhone properly in the iPod/iPhone

station. Make sure you place the iPod/iPhone correctly in the iPod/

iPhone station. See chapter ‘Using the appliance’, section ‘Using the

iPod/iPhone’.
Perhaps you had not placed the Wake-up Light properly on the base.

Make sure you place the Wake-up Light properly on the base. Make

sure that the mains cord and/or the antenna are not stuck between

the base and the Wake-up Light.
Perhaps the plug of the Wake-up Light is not inserted properly in the

wall socket. Put the plug properly in the wall socket.
Perhaps there has been a power failure.

The music played by the

iPod/iPhone does not

come out of the speaker

of the Wake-up Light.

Perhaps you did not place the iPod/iPhone properly in the iPod/iPhone

station. Make sure you place the iPod/iPhone correctly on the iPod/

iPhone station. See chapter ‘Using the appliance’, section ‘Using the

iPod/iPhone’.
Perhaps you set a sound level that is too low. Set a higher sound level.

See chapter ‘Using the appliance’, section ‘Radio/volume.

The alarm sound with

the iPod/iPhone music

did not work.

Perhaps the playlist in your iPod/iPhone is empty. Make sure you put

your favorite music in the playlist.

Perhaps you did not select the iPod/iPhone as the alarm sound. Select

the iPod/iPhone as alarm sound when you set the alarm. See chapter

‘Using the appliance’, section ‘Setting the alarm sound’.

The controls on iPod/

iPhone did not work.

Perhaps the iPod/iPhone was not working properly. Try to restart the

iPod/iPhone.

EnglisH

15

Advertising
This manual is related to the following products: