Buffalo Technology NFINITI WZR-HP-G300NH User Manual
Page 17
WZR-HP-G300NH User Manual
16
Chapter 3 Installation
5
Connect your computer to one of the AirStation’s LAN ports with the LAN cable.
6
Turn on the AirStation, wait one minute, and then turn on your computer.
7
Once your computer has booted, the AirStation’s LEDs should be lit as described below:
POWER
Green light on.
WIRELESS
Green light on or blinking.
ROUTER
Green light on or off depending on your network.
DIAG
Off
LAN
Green light on or blinking.
INTERNET
Green light on or blinking.
For LED locations, refer to chapter 1.
8
Launch a web browser. If the [home] setup screen is displayed, setup is complete.
If a user name and password screen is displayed, enter [root] (in lower case) for the user
name, leave the password blank, and click [OK]. Step through the wizard to complete setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
Wireless Router
(rear side)
power outlet
1) Connect the power supply
Wireless Router
1) connect
2) connect
LAN cable
computer
OFF