Philips SalonStraight Control + Lisseur - Manual (Page 8)

products may cause damage to the ceramic-tourmaline coated
straightening plates.
The straightening plates have a ceramic-tourmaline coating. This
coating slowly wears away over time. This does not affect the
performance of the appliance.
If you use the appliance on colour-treated hair, the straightening plates
may stain.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
using the appliance
Straighteners are powerful styling tools and must always be used with
care.
As with all straighteners that reach salon-high temperatures, do not use
the appliance frequently to avoid damage to the hair. If you use the
straightener incorrectly or if you use it at the wrong temperature setting,
you could overheat your hair or even burn it. Always make sure you
select a temperature setting that is suitable for your hair type.
straightening
1 Put the plug in the wall socket.
 Set the on/off switch to ‘I’.
The green power-on light goes on.
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
 Turn the temperature wheel to select the required temperature
setting (the thicker the line on the temperature wheel, the higher
the setting). Select a temperature setting that is suitable for your
hair type. (Fig. )
-
-
,
EnglisH 8