Black & Decker BLP7600B - Manual (Page 2)

Size: 19.685" x 17.5"
Póliza de Garantía
(Válida sólo para méxico)
Duración
Applica Manufacturing, S. de R. l. de C.V. garantiza este producto por 2 años a
partir de la fecha original de compra.
¿Qué cubre esta garantía?
esta Garantía cubre cualquier defecto que presenten las piezas, componentes y la
mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al Centro de Servicio Autorizado la
póliza sellada por el establecimiento en donde adquirió el producto. Si no la tiene,
podrá presentar el comprobante de compra original.
¿Donde hago válida la garantía?
llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de Servicio
Autorizado más cercano a su domicilio en donde usted podrá encontrar partes,
componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
Acuda al Centro de Servicio Autorizado con el producto con la póliza de Garantía
sellada o el comprobante de compra original, ahí se reemplazará cualquier pieza
o componente defectuoso sin cargo alguno para el usuario final. esta Garantía
incluye los gastos de transportación que se deriven de su cumplimiento.
Excepciones
esta Garantía no será válida cuando el producto:
A) Se hubiese utilizado en condiciones distintas a las normales.
B) No hubiese sido operado de acuerdo con el instructivo de uso que le acompaña.
C) Cuando el producto hubiese sido alterado o reparado por personas no
autorizadas por Applica Manufacturing, S. de R. l. de C.V.
nota: Usted podra encontrar partes, componentes, consumibles y accesorios
en los centros de servicios autorizados. esta garantía incluyen los gastos de
transportación que se deriven de sus cumplimiento dentro de sus red de servicio.
Argentina
SeRVICIo TeCNICo CeNTRAl
ATTeNdANCe
Avda. Monroe N° 3351
Buenos Aires – Argentina
Fonos: 0810 – 999 - 8999
011 - 4545 - 4700
011 – 4545 – 5574
[email protected]
Chile
MASTeR SeRVICe SeRVICeNTeR
Nueva los leones N° 0252
Providencia
Santiago – Chile
Fono Servicio: (562) – 232 77 22
[email protected]
Colombia
PlINAReS
Avenida Quito # 88A-09
Bogotá, Colombia
Tel. sin costo 01 800
7001870
Costa Rica
Aplicaciones electromecanicas, S.A.
Calle 26 Bis y Ave. 3
San Jose, Costa Rica
Tel.: (506) 257-5716 / 223-0136
Ecuador
Servicio Master de ecuador
Av. 6 de diciembre 9276 y los Alamos
Tel. (593) 2281-3882
El Salvador
Calle San Antonio Abad 2936
San Salvador, el Salvador
Tel. (503) 2284-8374
Guatemala
MacPartes SA
3ª Calle 414 Zona 9
Frente a Tecun
Tel. (502) 2331-5020 / 2332-2101
Honduras
ServiTotal
Contigua a Telecentro
Tegucigalpa, Honduras,
Tel. (504) 235-6271
méxico
Articulo 123 # 95 local 109 y 112
Col. Centro, Cuauhtemoc,
México, d.F.
Tel. 01 800 714 2503
nicaragua
ServiTotal
de semáforo de portezuelo
500 metros al sur.
Managua, Nicaragua,
Tel. (505) 248-7001
Panamá
Servicios Técnicos CAPRI
Tumbamuerto Boulevard
el dorado Panamá
500 metros al sur.
Tel. 3020-480-800 sin costo
(507) 2360-236 / 159
Perú
Servicio Central Fast Service
Av. Angamos este 2431
San Borja, lima Perú
Tel. (511) 2251 388
Puerto Rico
Buckeye Service
Jesús P. Piñero #1013
Puerto Nuevo, SJ PR 00920
Tel.: (787) 782-6175
Republica Dominicana
Plaza lama, S.A.
Av, duarte #94
Santo domingo,
República dominicana
Tel.: (809) 687-9171
Venezuela
Inversiones BdR CA
Av. Casanova C.C.
City Market Nivel Plaza local 153
diagonal Hotel Melia,
Caracas.
Tel. (582) 324-0969
www.applicaservice.com
[email protected]
Por favor llame al número correspondiente que aparece en la lista a continuación
para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar
servicio, reparaciones o partes en el país donde el producto fué comprado.
También puede consultarnos en el e-mail servicio@applicamail com.mx
es una marca registrada de The Black & decker Corporation,
Towson, Maryland, e.U.
POLARIZED PLUG (120V models Only)
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
do not attempt to modify the plug in any way.
TAmPER-RESISTAnT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repair should be done only by authorized
service personnel.
ELECTRICAL CORD
a) A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
b) longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord
or extension cord should be at least as great as the electrical
rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should
be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over
the countertop or tabletop where it can be pulled on by children
or tripped over.
note: If the power supply cord is damaged, it should be replaced by
qualified personnel or in latin America by an authorized service center.
Please Read and Save this Use and Care Book.
ImPORTAnT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
❍
Read all instructions.
❍ To protect against risk of electrical shock do not immerse cord,
plugs or appliance in water or other liquid.
❍ Close supervision is necessary when any appliance is used by or
near children.
❍ Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
❍ Avoid contacting moving parts.
❍ do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to the nearest authorized service
facility or call the appropriate toll-free number on the front of
this manual for examination, repair or electrical or mechanical
adjustment. or, call the appropriate toll-free number on the cover
of this manual.
❍ The use of attachments, including canning jars, not recommended
by the manufacturer may cause fire, electric shock or injury.
❍ do not use outdoors.
❍ do not let cord hang over edge of table or counter.
❍ Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. A
scraper may be used, but must be used only when the blender is
not running.
❍ Blades are sharp. Handle carefully.
❍ To reduce the risk of injury, never place cutter-assembly blades
on base without jar properly attached.
❍ Always operate blender with cover in place.
❍ When blending hot liquids, remove center piece of two-piece cover.
SAVE THESE InSTRUCTIOnS.
This product is for household use only.
BLEnDER JAR ASSEmBLY
1. After unpacking the blender, before first use, wash all parts except the
unit base.
2. Remove and save literature.
3. Put the gasket on top of the blade assembly.
4. Place the blade assembly into the jar base and
turn the jar base clockwise until tight (A).
5. Interlock System: Place the assembled jar onto
the unit base and turn toward the lock symbol
( ) until secured in place. You have engaged the
interlock system if you lift the jar handle and the
entire blender lifts together as one unit.
How to Use
This product is for household use only.
note: Your unit has an intelligent fuse system designed to protect the
motor from overheating. It automatically shuts off the motor and resets
the unit. Simply wait a moment, unplug the unit then plug again to restart
operation.
1. Make sure the unit is oFF and plug the cord into a standard electrical
outlet.
2. Place the food into the jar and the lid on the jar before blending.
3. Make sure that the lid cap is in place.
note: When crushing hard foods, keep one hand on the lid.
4. Choose the speed that best suits your task for food
or beverage blending (B).
5. When finished blending, press the on/off button.
6. For quick or delicate blending tasks use the Pulse
button for a few seconds, then release. Releasing
the Pulse button automatically turns off the
blender.
7. To add ingredients while the blender is on, remove the lid cap and drop
ingredients through the lid opening.
8. To remove the jar, grasp the handle, twist toward the unlock symbol
( ) and lift it from the unit base.
9. Remove the lid before pouring.
BLEnDInG TIPS AnD TECHnIQUES
• Cut food into small pieces 3/4” (2 cm) before adding to the blender.
• When ingredients stick or splatter along the sides of the jar, stop the
blending action and remove the lid. Use a rubber spatula to push food
toward the blades. Replace the lid, then continue blending.
• Some of the tasks that cannot be performed efficiently with a blender
are: beating egg whites, whipping cream, mashing potatoes, mixing
dough and extracting juices from fruits and vegetables.
• The following items should never be placed in the appliance as they
may cause damage: dried spices and herbs (ground alone), bones, large
pieces of solidly frozen foods and tough foods such as turnips.
• Use the lid cap to measure ingredients up to 60 ml (2 oz.) when adding
ingredients like lemon juice, cream or liqueurs.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEAnInG
1. Before cleaning, turn off and unplug the unit. Twist to unlock (
),
lift the jar off the unit base and rinse. For easier cleanup, rinse parts
immediately after blending. Parts may be hand-washed.
2. do not immerse the base in liquid. Wipe the unit base with a damp cloth
and dry thoroughly. Remove stubborn spots by rubbing with a damp
cloth and nonabrasive cleaner.
note: If liquids spill into the base, wipe with a damp cloth and dry
thoroughly. do not use rough scouring pads or cleansers on parts or finish.
3. Removable parts can be washed by hand or in a dishwasher. lid, lid cap
and blade assembly should be placed in the top rack only. The jar is
bottom rack dishwasher-safe. do not place jar or parts in boiling liquids.
Product may vary slightly from what is illustrated.
is a registered trademark of The Black & decker Corporation,
Towson, Maryland, USA










1. Lid cap
2. Lid
3. 42-oz./5-cup glass jar
4. Handle
5. Gasket
6. Blade assembly
7. Jar base
8. Unit base
9. Speed buttons
10. Pulse and On/Off button
A
B