BT 1800 - Manual (Page 15)

➜
Select the CD-ROM drive option.
➜
Click Next>.
➜
Select the on-screen option Search for a
suitable driver for my device .
➜
Click Next>.
➜
Click Next>.
15
1
2
1
2
Important
If an external USB hub is used to plug the
BT On-Air USB unit into your computer, it
must be one that is mains powered.
➜
Switch on your computer and close any
open applications.
➜
Insert the CD installation software for the
BT On-Air 1800 into your CD ROM drive.
➜
Plug the BT On-Air USB unit into a free
USB port identified by the symbol below
on your computer.
Windows will automatically detect the
BT On-Air USB unit and the screen. (If this does
not happen see Help, page 48.)
After a few seconds, the screen will then
display Found New Hardware Wizard ready to
search for the USB On-Air Wireless Modem
driver.
1c Drivers Installation for
Windows 2000
1