Brother 888-X56 - Manual (Page 11)

10
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1
Reverse sewing lever
You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in as
far as possible and hold it in that position while you
lightly push the foot controller. To sew forward, release
the reverse sewing lever. The machine will then sew
forward.
The length of reverse stitches is fixed at 2 mm
(1/16 inch).
1 Reverse sewing lever
2 (1/16)
22, 29, 30,
32
ZIGZAG STITCH 5 (3/16)
0.5 (1/32)
22, 29
ZIGZAG (SATIN)
STITCH
5 (3/16)
1.6 (1/16)
22, 31
STRAIGHT STITCH
(Center Needle
Position)
—
1.8 (1/8)
22, 31
STRAIGHT STITCH
(Center Needle
Position)
—
2 (1/16)
22, 31
STRAIGHT STITCH
(Center Needle
Position)
—
3 (1/8)
22, 28, 29,
31, 32
STRAIGHT STITCH
(Center Needle
Position)
—
4 (3/16)
22, 31
STRAIGHT STITCH
(Center Needle
Position)
—
2.5 (3/32)
22, 29, 31
STRAIGHT STITCH
(Left Needle Position)
—
2 (1/16)
23, 32
BLIND HEM STITCH 5 (3/16)
1 (1/16)
24
ELASTIC STITCH 5 (3/16)
Pattern
Preset Length
(mm (inch)) Reference
Page
Stitch Name
Preset Width
(mm (inch))
4
5
6
7
8
9
10
11
12
13
2 (1/16)
23, 32
STRETCH BLIND
HEM STITCH
5 (3/16)
2 (1/16)
24
OVEREDGE STITCH 5 (3/16)
1.2 (1/16)
25
DOUBLE ACTION
STITCH
5 (3/16)
1.2 (1/16)
25
BRIDGING STITCH 5 (3/16)
Pattern
Preset Length
(mm (inch)) Reference
Page
Stitch Name
Preset Width
(mm (inch))
14
15
16
17
1