BMW Motorrad K1300S - Manual (Page 113)

must be ensured that the TPC/
RDC sensor is not damaged. In-
form the BMW Motorrad retailer
or the specialized workshop of
the TPC/RDC sensor.
Removing front wheel
Make sure the ground is level
and firm and park the motorcy-
cle.
Remove screws 1 on left and
right.
Pull out front wheel cover to-
ward front.
Unclip two retaining clips 1 of
the ABS sensor cable on brake
line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers. Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
left and right brake calipers.
8
109
z Maintenance