Beko WMD 78144 - Manual (Page 21)

EN 21
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press “Time delaying” buttons
“+” and “-” (Figure 2-8) to set
your desired time delay. The Time
delaying symbol (Figure 3-13h) will
flash.
4. Press “Start/Pause/Cancel” button
(Figure 2-10). Then the time delay
starts to count down. The Time
delaying symbol (Figure 3-13h) will
light up. The Start symbol (Figure
3-13j) will light up.
The “:” in the middle of the displayed
time delay will start to flash.
• More laundry may be loaded or
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol (Figure 3-13h) fades and
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
the countdown:
1. Press “Start/Pause/Cancel” button
(Figure 2-10). “ : “ in the middle of
the screen will stop flashing. The
Standby symbol (Figure 3-13k) will
light up. The Time delaying symbol
(Figure 3-13h) will flash. The Start
Symbol (Figure 3-13j) will fade.
2. Press “Time delaying” buttons “+” or
“-” (Figure 2-8) to set your desired
time delay.
3. Press “Start/Pause/Cancel” button
(Figure 2-10). The Time delaying
symbol (Figure 3-13h) will light up.
The Standby symbol (Figure 3-13k)
will fade. The Start symbol (Figure
3-13j) will light up.
4. The “:” in the middle of the displayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press “Start/Pause/Cancel” button
(Figure 2-10). The “:” in the middle
of the displayed time delay will stop
flashing.
2. Start symbol (Figure 3-13j) will fade.
The standby symbol (Figure 3-13k)
and the time delaying symbol (Figure
3-13h) will flash.
3. Press time delaying button “-”
(Figure 2-8) to decrease the desired
time delay. Program duration after
30 minutes shall be displayed.
4. Press Start/Pause/Cancel Button
(Figure 2-10) to start the program.
Starting the Program
1. Press Start/Pause/Cancel button
(Figure 2-10) to start the program.
2. The start symbol (Figure 3-13j)
which indicates that the program
has started will light up.
3. The door locks and the door locked
symbol (Figure 3-13i) will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has
started from will light up (Figure
3-13f).
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
• At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that lights up at the far right
of the series of symbols indicates
the step that is being carried out.
Pre-wash
When "prewash" auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.