Bissell POWERSTEAMER 1623 - Manual (Page 12)

12
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF. Unplug the machine
and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse it
with running hot tap water, taking care to clean
underneath and around the heavy duty bladder.
Clean out red lint screen. Removable nozzle may
be rinsed if necessary.
3. Replace the 2-in-1 water tank on the machine.
4. Any loose hair or debris can be pulled from
the brush roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before storing.
Clean the hose by suctioning clean water from
the tap. Before wrapping back on machine, lift
end of hose and stretch out to ensure all water
is cleared from hose. Refer to page 10,
illustrations 11 and 12.
6. Wipe the machine’s exterior with a soft cloth.
7. After carpet is dry, vacuum again to remove
hair and fuzz.
Machine storage
Put the unit away in a closet or basement for
the next use. Store cleaner in a protected, dry
area. Since this product uses water, it must not
be stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
M
aintenance and care
ug120-4073_1623_908.indd 12 10/14/08 12:59:40 PM