Bissell 1623 - Manual (Page 8)

16
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
8
O
peration
Fill the 2-in-1 water tank (continued)
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position.
Carpet cleaning strokes
1. Plug the deep cleaner into a proper outlet.
Turn the power ON by pressing the red
power switch on the back of the unit with
your foot.
2. With your foot, press the gray handle release
lever located on the back of unit below
water tank.
3. While pressing the spray trigger, make one
slow forward wet pass and another back.
Let the BISSELL 2X advanced deep cleaning
formula and DirtLifter PowerBrush do the
work for you. Caution: Do not overwet.
4. Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty
water and aid in drying.
5. Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the trigger until you can’t
see any more water being suctioned up.
6.
Tip:
Thorough vacuuming
before deep cleaning will prevent
early clogging of the lint trap.
WARNING:
To reduce the risk of fire
and electric shock due to
internal component
damage, use only BISSELL
cleaning fluids intended for
use with the deep cleaner.
Non-BISSELL cleaning
solutions may harm the
machine and void
the warranty.
5.
Power Switch Handle Release