Bushnell 11-8338 - Manual (Page 8)


File Size/Resolution (1-4 Stars): High resolution (3 or 4 stars) settings are recommended for
best results, but low resolution can be used if you need to shoot a greater quantity of photos
before downloading, and quality is not a high priority.
Quality (Hq or Lq) : Select “Hq” for High Quality photos (recommended setting, least amount
of file compression). Select “Lq” (Low Quality) to store more photos in memory but with a
slight loss in quality due to greater file compression.
USB Mode (STO or PCC): Always select “STO” , allowing you to download and view the photos
in the camera’s memory when it is connected to your PC with a USB cable (included). “PCC”
is a live PC camera option that is was not implemented in this camera model (software is not
supplied or available for this application), as the camera has a fixed focus preset for distances
of 30 feet or greater.
Power Frequency (60 or 50 Hz): This sets the correct electrical line frequency to avoid any
return to normal operation in a few seconds (all your photos will not be deleted). When the process is
complete, the photo number display will reset to zero. If no button is pressed for 5 seconds, the camera
returns to stand-by. “Delete All” is a quick way to clear the memory following a download of your
photos to a computer, so that the camera is ready to hold as many new photos as possible.
• Delete One ( ) : Pressing SNAP when the “Delete One” icon is displayed will delete (erase) only the
last photo you took from the camera’s memory.
• SETUP Menu (SET): Pressing SNAP when “SET” is displayed will enter the Setup Menu display,
which has four different settings, each with two options available. Use the MODE button to cycle
through the four settings. Pressing the SNAP button will switch (“toggle”) between the two options per
setting. The four settings (plus “ESC” to exit the setup menu) are displayed in the following order:
CHANGING OPERATIONAL MODES continued
FINAL 118338 QVC Imageview 1LIM 8 8 9/17/07 7:48:05 PM