Philips HAIRCLIPPER Series 3000 Tondeuse à cheveux User Manual
Page 10
4
To trim most effectively, move the trimmer against the hair growth
direction. Make sure the surface of the comb always stays in contact
with the skin.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
Never immerse the appliance in water or rinse it under the tap.
Note: Only the cutting element and the comb can be cleaned with water.
1
Make sure the appliance is switched off and disconnected from the
mains.
2
Wipe the housing of the appliance with a dry cloth.
3
Remove the comb and clean it with the brush or rinse it under the
tap.
4
Press the release button (1). The cutting unit comes off the appliance
(2).
5
Clean the cutting unit with the brush or rinse it under the tap.
6
Clean the inside of the appliance with the brush.
Never immerse the appliance in water or rinse it under the tap.
7
Shake off excess water. To reattach the cutting unit, insert the lug of
the cutting unit into the guiding slot.
EnglisH
10