Bunn TU3A - Manual (Page 2)

Features
Related Products
ITEM#
PROJECT
DATE
For current specification sheets and other information, go to www.bunn.com.
Patents Apply
BUNN ® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.
Dimensions & Specifications
BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord
Watts Watts Capacity Ft. Weight Attached
TU3Q* 03700.0013 120 14.8 1680 1780 26.7 gal./hr. 7.3 42 lbs. (19.1 kg) Yes †
TU3Q Δ 03700.0076 120 14.8 1680 1780 26.7 gal./hr. 7.3 42 lbs. (19.1 kg) Yes †
TU3Q w/TD4T 03700.0041 120 14.8 1680 1780 26.7 gal./hr. 9.1 54 lbs. (24.5 kg) Yes †
TU3Q** 03700.0059 120 14.8 1680 1780 26.7 gal./hr. 6.02 40 lbs. (18.2 kg) Yes †
TU3 03700.0009 120 14.8 1680 1780 16.3 gal./hr. 7.3 43 lbs. (19.5 kg) Yes †
TU3*** 03700.0030 120 14.8 1680 1780 16.3 gal./hr. 7.1 41 lbs. (18.6 kg) Yes †
* With 8” extension ** With 4.64” extension for 90 oz. concentrate *** With 3” extension † Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Δ Quick disconnect.
Electrical: Models require 2-wires plus ground service rated at 120V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 1 ⁄
4
" (6.3 mm) OD male flare fitting.