Belkin Wireless Router F5D7234-4-H User Manual
Page 35
33
Wireless G Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
1�
IP address
Provided by your ISP� Enter your IP address here�
2�
subnet Mask
Provided by your ISP� Enter your subnet mask here�
3�
IsP Gateway address
Provided by your ISP� Enter the ISP gateway address here�
setting your Internet service Provider (IsP) Connection Type to static IP
A static IP address connection type is less common than other connection types� If your ISP uses static IP addressing, you will need your IP address
(1), subnet mask (2), and ISP gateway address (3)� This information is available from your ISP or on the paperwork that your ISP left with you� Type in
your information, then click “Apply Changes”� After you apply the changes, the “Internet Status” indicator will read “Connected” if your Router is set
up properly�
(1)
(2)
(3)