Bayer HealthCare Ascensia Contour Blood Glucose Meter - Manual (Page 5)

Need Help? Call: 0845 600 6030 (UK)/1 890 920 111 (Ireland)
3
Important
www.ascensia.co.uk
Your Meter Display
The picture below shows all the symbols that will appear on your
meter display. When the meter is off, press and continue holding
the ▲ or ▼ button. All segments will be displayed and remain
on while holding the button down for 10 seconds. Repeat as
needed to compare your meter to the display shown below.
While all characters are displayed, it is most important
to verify that
is fully displayed. If there is a
difference, see Error Codes and Symbols (page 17).
This may affect the way you see your results.
or
will appear if
the meter is in
12 hour setup.
Center area on the
display that shows either
your test result or any
error codes.
Top area on
the display
presenting
date and time.
Control result marker.
Displays the
date format.
Results are
displayed
along with the
preset units of
measure. The 7
appears when
viewing number
of results over
past 7 days.
Indicates it is too cold
or too hot for your
meter to test accurately.
Average.
Indicates the
batteries are low.
Will remain on
until batteries are
changed.
Indicates the meter
is ready to test.
A
. /
Indicates beeper
is turned on.
Your Meter Display
Identifi es
a test result
as unique or
different.
Post-meal
result marker.
Pre-meal
result marker.
Indicates
an alarm has
been set.