Billy Goat MV650H User Manual
Page 6
Part No 840186
6
Form No F030106A
MV650H PUSH Vacuum Owner’s Manual
SOUND DATA
SOUND LEVEL 105 Dba at Operator Position
Sound tests were conducted in accordance with 2000/14/EEC and were performed on 12-12-2005 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to
serial plate on the unit for the sound power level for your model.
General Conditions:
Sunny
Temperature:
41
o
F (5
o
C)
Wind Speed:
9.2 mph (14.8kph)
Wind Direction:
Northwest
Humidity:
59%
Barometric Pressure:
30.13” Hg (765mm Hg)
VIBRATION DATA
VIBRATION LEVEL 2.3g
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 12-12-2005 under the conditions listed below.
General Conditions:
Sunny
Temperature:
41
o
F (5
o
C)
Wind Speed:
9.2 mph (14.8kph)
Wind Direction:
Northwest
Humidity:
59%
Barometric Pressure:
30.13” Hg (765mm Hg)
INTENDED USE
Your BILLY GOAT ® MV Vacuum is designed for vacuuming leaves, grass clippings, and other types of organic
litter, as well as, debris mixed with cans, bottles and small amounts of sand; however, vacuuming cans, bottles
and sand will affect the longevity of your machine.
Like all mechanical tools, reasonable care must be used when operating the machine.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and
check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign
objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page
25).