Brother HL-3450CN - Manual (Page 181)

CHAPTER 7 TROUBLE SHOOTING
7-3
Error Message Remarks
MEDIATYPE ERROR
Specify the correct media type: XX
XX=T1, T2, T3, or DX
XX = T1, T2, T3 or DX
NO FUSING UNIT
A fusing unit was not detected. Please install one.
CARD ERROR
An error occurred while accessing the Flash card.
Check that the driver is formatted and not in Write
Protect mode.
HDD ERROR
An error occurred while accessing the HDD. Power
cycle the printer and check that it is formatted.
DIMM ERROR
Ensure that the DIMM is installed correctly.
CARD REMOVAL
The Flash card was removed while the printer was
powered on. Power cycle the printer.
BUFFER ERROR
Check the cable connection between the computer
and the printer.
STORAGE FULL
There is not enough space on the Hard Disk.
STORAGE FULL
The RAMDISK SIZE is set to 0MB or there is no
more space to store jobs.
STORAGE FULL
There is no space in the CompactFlash.
DOWNLOAD FULL
The download buffer of the printer is full. Add more
memory to the printer.
MEMORY FULL
The printer memory is full and the printer is unable to
print the page. Add more memory.
PRINT OVERRUN
Select a lower resolution or set the page protection
option in the driver to the correct size.
MEMORY SHORTAGE
Add memory.
Install additional DIMM
memory so that the total
memory size is 64MB or more.