Bunn CRT5 CRTF5 - Manual (Page 19)

Page 19
SERVICE (cont.)
START SWITCH
Location:
On brewers w/out fresh light the start switch is
located in the right front of the hood.
On brewers w/fresh light the start switch is located
on the right side of the hood.
Test Procedure:
1. Disconnect the brewer from the power supply.
2. Disconnect the blue wire and the white/red wire
from the switch terminals.
3. Check for continuity across the two terminals on
the switch when it is held in the "pressed-in"
position. Continuity must not be present across
these terminals in the released position.