Buffalo Technology HD-PFU2 - Manual (Page 6)

EN

Using TurboUSB 5
Fig: 5
Fig: 6
To use TurboUSB, you must first enable it. From the Start menu, choose
Programs > BUFFALO > TurboUSB > TurboUSB for HD-PFU2. (Fig: 5)
Click Enable and follow the instructions. (Fig: 6)
Once the wizard has completed you must disconnect the MiniStation by
clicking on the ‘Safely Remove Hardware’ icon in the systray (located
in the taskbar) (Fig: 6). Once indicated, remove and reattach the USB cable
from your PC to finalise activation of TurboUSB.
The Buffalo TurboUSB utility can greatly improve the data transfer rates to
and from your Buffalo USB hard drive. The utility cannot be used with other
USB devices.