Blaupunkt BRISTOL CD36 - Manual (Page 20)

43
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Cancelling SCAN
To stop scanning,
➮
briefly press the MENU button
7.
The currently scanned track will then
continue to be played normally.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
➮
Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 ; whilst pause
is activated.
Playback is resumed.
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮
press and hold down the SRC
button
= until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮
press the MENU button 7.
➮
Press the or button
8 re-
peatedly until “CLOCK SET” ap-
pears in the display.
➮
Press the button 8.
The clock time appears in the display.
The hours flash and can be adjusted.
➮
Adjust the hours using the
buttons
8.
Once the hours are set,
➮
press the button 8.
The minutes flash.
➮
Adjust the minutes using the
buttons
8.
➮
Press the MENU button 7 twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button
7.
“MENU” appears in the display.
➮
Press the or button
8 re-
peatedly until “24 H MODE” or “12
H MODE” appears in the display.
➮
Press the or button 8 to
switch between the modes.
CD-CHANGER MODE CLOCK TIME
02Bristol_VancCD36 gb 07.02.2006, 15:42 Uhr 43