Liebherr LTR 1060 - Manual (Page 5)

3500
6210
314
5
27
0
0
R=400
5
R=3500
48
0
0
70
0
11385
S2456.01
LTR 1060 5
Economical transportation and simple erection
Optimized weights and dimensions
The design lay out of the 60 ton crane allows a particular economic transporta-
tion. Complete with slewing platform and central ballast the LTR 1060 weighs
only 62.6 t. The axle loads on transportation with a 3-axle tractor and a 5-axle
trailer stay below 12 t. When using a 6-axle trailer and a 4-axle tractor the axle
loads can even be reduced to 10 t.
The crawlers are retracted to a width of 3.0 m during transportation. Due to the
low crane height of 3.15 m cost effective standard low-bed trailers can be used.
By dismantling of the ballast the transport weight can further be reduced down
to the dead weight of the basic machine of 37.5 t. On the job site the central bal-
last as well as the slewing platform ballast can be self installed without the use
of an auxiliary crane. A hydraulic self ballasting device is optionally available.
Slewing platform ballast max. 15.6 t