Liebherr R 984 C - Manual (Page 3)

BP_GET_WF.indd 3 25.03.13 13:55
3 Ground Engaging Tools
Liebherr Mining GET Solution - Outline
With an ever-increasing productivity focus, Liebherr has developed a complete
mining Ground Engaging Tools solution to complement Liebherr’s mining backhoe
and face shovel bucket design. A synergy that enables easy material penetration
while extending the life of the bucket.
Three Tooth Profiles, in Five Sizes
The Z system is available in three profiles to cover an extensive range of applica-
tions types, from well-blasted material to very hard ground. Liebherr GET solution
is compatible with mining backhoes and face shovels from R 9100 up to R 9400.
Innovative Design
Thanks to the self-sharpening tooth design, machine operators will experience an
optimal combination of bucket penetration and high fill factor over the teeth life-
time. To reduce parts inventory Liebherr has designed a single wing shrouds and
corner wear caps for each model, interchangeable from left hand side, right hand
side and top to bottom.
One Single Locking System
To increase machine uptime and reduce tooling to one unique extraction tool, the
teeth, shrouds and wing shrouds are equipped with one single locking system. In
addition the wear cap does not require any locking system as it is slipped on the
adaptor and locked by the tooth.
Truly Hammerless System
With its unique hammerless locking system, the replacement of the teeth and the
wing shrouds is simple: the securing pin, the tooth, and the adapter are quickly
locked by a 90° tool maneuver.
Customer Benefits
• Better supply chain coordination
• Higher productivity
• Reduced operating and owning costs
• Reduced parts inventory
• Maximized machine uptime
Easy Serviceability
• One single locking system
• Truly hammerless system
• A simple tooth exchange
• A single person can release it
Proactive Service Supplying
• Global network of Liebherr affiliates
and exclusive representatives
• Customer specific requirement study
• Collaborative solution development
BP_GET_WF.indd 3 25.03.13 13:56