Liebherr L 566 - Manual (Page 16)

Loading Bucket L 550 L 556 L 566 L 580
Geometry
Cutting tools
Lift arm length
ft in
Bucket capacity according to ISO 7546 ** yd 3
Bucket width ft in
A Dumping height at max. lift height and 45° discharge ft in
B Dump-over height ft in
C Max. height of bucket bottom ft in
D Max. height of bucket pivot point ft in
E Max. operating height ft in
F Reach at max. lift height and 45° discharge ft in
G Digging depth ft in
H Height above cab ft in
I Height above exhaust ft in
J Ground clearance ft in
K Wheelbase ft in
L Overall length ft in
Turning circle radius over outside bucket edge ft in
Breakout force (SAE) lbf
Tipping load, straight * lb
Tipping load, articulated at 37° * lb
Tipping load, articulated at 40° * lb
Operating weight * lb
Tire sizes
* The figures shown here are valid with tires above and include all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tires
and optional equipment will change the operating weight and tipping load. (Tipping load, articulated at 40° according to ISO 14397-1)
** Actual bucket capacity may be approx. 10% larger than the calculation according to ISO 7546 standard. The degree to which the bucket can
be filled depends on the material – see pages 24.
= Excavation bucket with back grading edge for direct mounting
= Rehandling bucket for direct mounting
ZK = Z-bar linkage
T = Welded-on tooth holder with add-on teeth
ZK ZK ZK ZK
T T T T T T T T
23.5R25 L3 23.5R25 L3 26.5R25 L3 26.5R25 L3
8’6”
4.2
8’10”
9’5”
11’6”
12’
12’10”
17’8”
3’7”
3”
11’
9’11”
1’7”
10’10”
27’2”
21’2”
31,475
30,390
27,140
26,785
38,140
8’6”
4.7
8’10”
9’4”
11’6”
12’
12’10”
17’11”
3’10”
3”
11’
9’11”
1’7”
10’10”
27’2”
21’3”
33,720
33,885
30,300
29,870
39,460
9’7”
5.2
9’10”
10’8”
12’10”
13’3”
14’4”
19’3”
3’10”
4”
11’9”
9’10”
1’9”
12’5”
30’5”
24’10”
44,960
40,115
35,495
34,725
51,035
10’
6.5
10’10”
10’11”
13’5”
14’
15’
20’10”
3’9”
4”
11’9”
9’10”
1’9”
12’10”
31’8”
25’11”
42,715
46,795
41,555
40,785
55,510
8’6”
4.7
8’10”
9’2”
11’6”
12’
12’10”
17’9”
4’
3”
11’
9’11”
1’7”
10’10”
27’2”
21’3”
29,225
29,805
26,785
26,300
38,370
8’6”
5.2
8’10”
9’1”
11’6”
12’
12’10”
18’
4’
3”
11’
9’11”
1’7”
10’10”
27’7”
21’4”
31,475
33,235
29,870
29,320
39,725
9’7”
5.9
9’10”
10’5”
12’10”
13’3”
14’4”
19’7”
4’1”
4”
11’9”
9’10”
1’9”
12’5”
30’8”
24’11”
42,715
39,200
34,745
34,015
51,255
10’
7.2
10’10”
10’8”
13’5”
14’
15’
21’1”
4’
4”
11’9”
9’10”
1’9”
12’10”
32’
26’1”
39,340
46,275
41,140
40,345
55,845
Dimensions
Z-bar linkage
16 L 550 - L 580
L0047.01
Info:
Es gibt im NTB diese Zeichnung als angeschnittene Version ohne die Maße K und L.
Die beiden wurden dazu hier lediglich ausgeblendet und ein neues PDF mit der
Endung _02 geschrieben.
A
I
H
B
C
D
E
J
G
49º
45º
65º
F
K
L