Liebherr GGPv 6570 ProfiLine - Manual (Page 9)

17
GB
10. Keeping door open at 90°, suspend
in top square pin.
WARNING!
It is essential that the door is
open at an angle of 90° during
installation.
If the door is installed in the
closed position, this will lead to
destruction of the self-closing
mechanism on the first opening
and closing of the door.
Important
As a result of its heavy weight, the door
must be held secure by one person.
12. Install the hinge bracket with the fitted
hinge components in the lower door
mounting.
Bearing ring
Brass washer
Plastic washer
11. Fit the hinge components on the hinge bracket.
Note on point 12
The tabs on the bearing ring must fit into
the recesses of the door mounting during
installation.
If necessary, gently rotate the upper ring.
13. Screw hinge bracket into place.
9. Insert the bearing ring and
hinge bushing in the upper
door mounting.
7. Transfer the upper hinge bracket and covers to the
opposite side.
8. Turn the door by 180°.