2 lan – Billion Electric Company BiPAC 5210S User Manual

Page 38

Advertising
background image

4.2.2 LAN

A Local Area Network (LAN) is a shared communication system to which many computers

are attached and is limited to the immediate area, usually the same building or floor of a

building.

Router Local IP

IP Address: Enter the IP address of ADSL Router in dotted decimal notation, for example,

192.168.1.254 (factory default).

IP Subnet Mask: The default is 255.0.0.0. User can change it to other such as

255.255.255.0.Type the subnet mask assigned to you by your ISP (if given).

Dynamic Route: Select the RIP version from RIP-1, RIP-2B and RIP-2M.

RIP Direction:

Select the RIP direction from None, Both, In Only and Out Only.

Multicast: IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to

establish membership in a Multicast group - it is not used to carry user data. The BiPAC

5200 Series supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable

it

36

Advertising