Liebherr MK 88 - Manual (Page 25)

25
Keep the load calm
With the wind load control the jib is automatically held in
place if the wind gets up. No need to counter-steer. This
means that loads which present large surface areas (such
as formwork panels) can be moved, held, and positioned
with absolute precision. Rapid slewing movements can lead
to loads starting to swing; the integrated load oscillation
damping compensates for this automatically.
Position loads with millimetric precision
At the press of a button on the control lever, MICROMOVE
comes into action, and reduces lowering to micro-speed.
This means that even the heaviest loads can be fl oated,
held, and positioned with extremely fi ne sensitivity, and with-
out engaging the hoist gear brake.
Horizontal load path – at the press of a button
With the MK 88 loads can be moved rapidly horizontally,
with the jib set at a steep angle. The intelligent control
system automatically levels the height of the load, depend-
ing on the movement of the trolley. You can work with the jib
at an angle just as if it were horizontal.
Mobile – and everything in view
The radio remote control with check-
back shows all the operational data
on two easily readable displays.
PN_MK88_de_en_fr.indd 25 08.12.11 13:29