6maintenance, 1defrosting with nofrost, 2cleaning the appliance – Liebherr ICN 3356 Premium NoFrost User Manual

Page 10: 6 maintenance, Maintenance, 1 defrosting with nofrost, 2 cleaning the appliance

Advertising
background image

Fig. 11

u

Pull the water tank forwards.

u

Remove cover and fill tank with water.

u

Replace the lid, put the filled water tank back into the holder

and push it right to the back.

Note

u

The water reservoir has to be slid all the way into the bracket

provided for the purpose in the refrigerator compartment!

Setting the water intake time*

The opening time of the IceMaker valve can be set to affect the

size of the ice cubes produced.
The water intake time can be set in stages from

E1

(short intake

time) to

E8

(long intake time). The intake is preset at

E3

.

u

To activate the setting mode: press the SuperFrost button

Fig. 2 (13)

for about 5 s.

w

The display indicates

c

.

w

Themenu symbol

Fig. 2 (17)

shines.

u

Using the Up setting button, freezer compartment

Fig. 2 (11)

and Down setting button, freezer compartment

Fig. 2 (12)

select

E

.

u

To confirm: briefly press the SuperFrost button

Fig. 2 (13)

.

u

To increase the water intake time: press the Up

setting button, freezer compartment

Fig. 2 (11)

.

u

To reduce the water intake time: press the Down

setting button, freezer compartment

Fig. 2 (12)

.

u

To confirm: press the SuperFrost button

Fig. 2 (13)

.

u

To deactivate the setting mode: press the On/Off button,

freezer compartment

Fig. 2 (9)

.

-or-

u

Wait for 5 minutes.

w

The temperature is indicated again in the temperature

display.

Switching off the IceMaker*

If no ice cubes are needed, the IceMaker can be switched off

independently of the freezer compartment.
When the IceMaker is switched off, the IceMaker drawer can

also be used for freezing and storing food.

u

Press the On/Off button for about 1 second until the LED

goes out.

w

The IceMaker symbol

Fig. 2 (19)

goes out.

u

Clean the IceMaker.

w

This ensures that no water or ice remains in the IceMaker.

6 Maintenance

6.1 Defrosting with NoFrost

The NoFrost system automatically defrosts the appliance.

Refrigerator compartment:

The defrost water evaporates due to the compressor heat.

Drops of water on the rear wall are perfectly normal.

u

Regularly clean the drain opening to allow the water to flow

away (see 6.2) .

Freezer compartment:

The moisture condenses on the evaporator, is periodically

defrosted and evaporates.

u

The appliance does not have to be manually defrosted.

6.2 Cleaning the appliance

WARNING

Risk of injury and damage as a result of hot steam!

Hot steam can lead to burns and can damage the surfaces.

u

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Please do not use any aggressive, scouring, sand-,

chloride-, chemical- or acid-based cleaning agents.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do not pull off, bend or damage cables or other compo-

nents.

u

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

u

Please use soft cleaning cloths and a universal pH-neutral

cleaning agent.

u

Please use cleaning and care products suitable for contact

with foodstuffs in the appliance interior.

u

Empty appliance.

u

Pull out the power plug.

u

Clean

plastic outer and inner surfaces

with lukewarm

water and a little washing-up liquid.

u

Clean

drain hole

: Remove deposits

with a narrow instrument, e.g. a

cotton bud.

u

Most of the

parts

can be dismantled for cleaning: see the

relevant chapter.

u

The

door interior parts

are dishwasher-safe. However, the

printing may dissolve over time.

u

Clean

other items of equipment

by hand with lukewarm

water and a little washing-up liquid.

u

Only use a damp cloth to clean the

telescopic rails

. The

grease in the runners is for lubrication purposes and must

not be removed.

u

Empty

water collect tray

: remove

water tank. Carefully unlatch tray

at front and then remove from

below.*

*

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Switch on SuperFrost (see 5.5.4) .

When the temperature is sufficiently cold:

u

Put the food back inside.

Maintenance

10

* Depending on model and options

Advertising