Liebherr ER 934 C Material Handler - Manual (Page 7)

0 m
0 ft
2 4 6 8 10
10 20 30 40
12 14
0
-2
-4
-6
-8
0
-10
-20
2
4
6
8
10
10
20
30
40
50
14
16
m ft
12
50
16 18
60
18
1
2
7 ER 934 C Material Handlers ER 934 C Material Handlers
Operating Weight
and Ground Pressure
Operating weight includes basic machine with hydraulic cab elevation,
counterweight 7.5 t, industrial-type straight boom 8.60 m, industrial
stick 7.50 m and grapple model 65 with 5 semi-closed tines 0.60 m
3 .
Undercarriage EW
Pad width mm 600 750
Weight kg 37,900 38,400
Ground pressure kg/cm 2 0.82 0.67
Industrial Attachment
with Industrial-Type Straight Boom 8.60 m
Attachment Envelope
Kinematic variant 2A
1 with industrial stick 7.50 m
2 with industrial stick 7.50 m and grapple model 65
Lift Capacities
Industrial Stick 7.50 m (Variant 2A)
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m
Under-
m carriage m
16.5 EW
15.0 EW
13.5 EW
12.0 EW
10.5 EW
9.0 EW
7.5 EW
6.0 EW
4.5 EW
3.0 EW
1.5 EW
0 EW
– 1.5 EW
– 3.0 EW
– 4.5 EW
– 6.0 EW
– 7.5 EW
6.7* 6.7* 6.4* 6.4* 6.14
6.9* 6.9* 5.1* 5.1* 8.91
7.7* 7.7* 6.7* 6.7* 5.0* 5.0* 4.5* 4.5* 10.78
7.5* 7.5* 6.3 6.5* 4.5* 4.5* 4.1* 4.1* 12.19
7.4* 7.4* 6.4 6.7* 5.0 5.4 3.9* 3.9* 13.28
7.5* 7.5* 6.3 6.7* 5.0 5.4 3.9 4.3 3.6 3.7* 14.13
8.7* 8.7* 7.6* 7.6* 6.2 6.7 4.9 5.3 3.9 4.3 3.3 3.6 14.77
9.0* 9.0* 7.8 7.9* 6.0 6.5 4.8 5.2 3.9 4.2 3.1 3.5 3.0 3.3 15.24
10.9* 10.9* 9.5* 9.5* 7.5 8.1* 5.8 6.3 4.6 5.1 3.8 4.1 3.1 3.4 2.9 3.2 15.55
21.0* 21.0* 16.4* 16.4* 12.4* 12.4* 9.4 10.0* 7.0 7.7 5.5 6.0 4.5 4.9 3.7 4.0 3.0 3.4 2.8 3.1 15.71
3.0* 3.0* 17.5* 17.5* 12.1 12.9* 8.7 9.6 6.6 7.3 5.3 5.8 4.3 4.7 3.5 3.9 3.0 3.3 2.8 3.0 15.73
2.3* 2.3* 7.5* 7.5* 11.2 12.4 8.1 9.0 6.3 6.9 5.0 5.5 4.1 4.5 3.4 3.8 2.9 3.2 2.8 3.1 15.60
3.0* 3.0* 6.3* 6.3* 10.5 11.8 7.7 8.5 6.0 6.6 4.8 5.3 4.0 4.4 3.4 3.7 2.9 3.2 2.8 2.9* 15.30
6.5* 6.5* 10.2 10.9* 7.4 8.3 5.8 6.4 4.7 5.2 3.9 4.3 3.3 3.7 3.1 3.1* 14.23
8.9* 8.9* 7.3 7.4* 5.7 6.2* 4.6 5.0* 3.9 3.9* 3.7* 3.7* 12.30
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities
are valid for 600 mm wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of
hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible
load of the load hook.
According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load
diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.