Liebherr WKUes 1753 Grand Cru - Manual (Page 6)

18
Switching the appliance on and off
You are recommended to clean the appliance before switch ing it on for the first time
(see
"Cleaning"). Connect the appliance to the mains - the appliance is switched on.
• To switch the appliance off: Keep the "ON / OFF" button pressed for 3 sec.
so that the temperature display goes out.
• To switch the appliance on: Press the "ON / OFF" button until the Display
lights up.
Setting the temperature
To reduce the temperature: Press the DOWN button;
To increase the temperature: Press the UP button.
- While you are entering the temperature, the set tempera-
ture will flash on the display.
- You can change the settings in increments of 1°C briefly
pressing the button again.
- The electronic controls will switch over automatically about 5 seconds after the last
time you pressed the button, and the actual temperature will be displayed.
If F1 appears in the display, the appliance has a fault. Consult your nearest customer
service point.
Fan switch
The interior fan ensures a constant and even interior temperature and a suitable
climate for wine storage. When activating the Ventilation button, the humidity in the
appliance is further increased, which has a particularly positive effect for long-term
storage. The increased level of humidity prevents the corks from drying out.
To switch on:
Hold down the
Alarm button and then press the
Light button. The LED will come on.
To switch off:
Hold down the
Alarm button and then press the
Light button. The LED goes dark.