Liccon2 – safe and comfortable, Supporting the crane, Attaching and detaching of the hook block – Liebherr LTM 1350-6.1 User Manual
Page 18: Wireless remote control (option)
Liebherr-Werk Ehingen GmbH
Postfach 1361, 89582 Ehingen, Germany
+49 7391 502-0, Fax +49 7391 502-3399
www.liebherr.com, E-Mail: [email protected]
PN 180.00.E08.2011
The illustrations contain also accessories and special equipment which are not included in the standard scope of delivery. Subject to technical modification.
LICCON2 – safe and comfortable
Colour monitor
The readability of the data on
the monitor of the LICCON2
control in the superstructure
cab is improved by the colour
display. Warnings and the
crane utilization are easier
detectable.
Supporting the crane
By use of the BTT the mobile crane
can be comfortably and safely sup-
ported on the outriggers. Engine start/
stop, speed regulation, electronic level
display, automatic support levelling
and display of the support forces are
available as standard.
Attaching and detaching of the
hook block
The BTT – Bluetooth Terminal offers the crane driver
the possibility to attach or detach the hook block at the
front of the vehicle within sight, as the hoist winch and
the luffing cylinder of the telescopic boom are remote
controlled.
Touch displays
Below the joy sticks integrat-
ed in the armrests the touch
displays are installed, with
which the various operational
functions can be selected.
These are beside others the
supporting of the crane, the
adjustment of the working
floodlights as well as heater
and air condition controls.
Wireless remote control
(option)
All crane motions can be controlled
outside of the cab.
• Higher efficiency
• Free view and closeness to the load
• Prevention of communication errors
between the crane driver and the job
site personnel
Wireless remote control