Liebherr LRB 155 - Manual (Page 11)

PDE - Process data recording
(Additional equipment)
This module constantly calculates and stores the current working processes.
PDE - diagram
Example of a protocol (in required language):
Measurements
Measurements are constantly calculated during the working
process.
No special measuring process is required. External systems can
also be connected to the system.
Display of measurement data
Measurement data relevant to the working process is displayed
on the monitor in the cab.
The operator can then control the process and, if necessary,
correct it.
Working process interruption
The working process and the measurement can be interrupted at
any time.
The measurements are automatically continued upon resumption
of work.
Storage of measurement and
machine data
All data is stored on a memory card. This can be read via a PC.
Thereby an evaluation and processing of data can also be
performed at a later time. For example, for:
D client certifications
D conveying daily production data, down time, etc.
D Soil condition report
Printing data
A protocol can be printed out from the cab printer after each
working process.
Data transmission
A GSM modem can be connected to the PDE making long
distance data transmission possible.
Ñ
External sensors
LRB 155 11