Liebherr LTM 1095-5.1 - Manual (Page 18)

PN 208.01.E02.2014 The illustrations contain also attachments and special equipment, which are not included in the standard scope of delivery. Subject to modification.
LICCON2 – safe and comfortable
Colour monitor
The readability of the
data on the monitor of the
LICCON2 control system in
the crane cab is enhanced by
the colour display. Warnings
and crane utilization are con-
siderably better recognized.
Wireless remote control
(option)
All crane motions can be controlled
outside of the cab.
• Higher efficiency
• Free view and closeness to the load
• Prevention of communication errors
between the crane driver and the job
site personnel
Attaching and detaching of the
hook block
The BTT Bluetooth Terminal offers the crane driver the
possibility to attach or detach the hook block at the front
of the vehicle within sight, as the hoist winch and the luff-
ing cylinder of the telescopic boom are remote controlled.
Touch display
Below the joysticks inte-
grated in the arm rest touch
displays are provided with
which various working func-
tions can be selected. Beside
others these are the drive and
steering programmes of the
carrier, the supporting of the
crane, the adjustment of the
working floodlights as well
as the heating and ventilation
control.
Supporting the crane
By use of the BTT the mobile crane will
be setup comfortably and safely. En-
gine start/stop and speed regulation,
electronic inclination display and auto-
matic levelling are standard. Optionally
the BTT can also display the outrigger
forces.
Wireless remote control
Liebherr-Werk Ehingen GmbH
Postfach 1361, 89582 Ehingen, Germany
 +49 7391 502-0, Fax +49 7391 502-3399
www.liebherr.com, E-Mail: [email protected]
www.facebook.com / LiebherrConstruction