Brother HL-1060 Series - Manual (Page 66)

CHAPTER 6 TROUBLESHOOTING
CHAPTER 6 –3
Error Action
Serial Interface Input
Buffer Overflow
•
Press the panel switch to resume printing.
•
Check the communication parameters such as the handshake
protocols on both your computer and printer.
•
If the error occurs again, the interface hardware may be
damaged. Consult your dealer.
✒ Note
If the printer does not operate as you expect it to, it is recommended that
you turn off the power switch, wait a few seconds and then turn it on again.
If you still have problems, consult your dealer or our authorized service
representative.