Billion Electric Company BiPAC 7402(G)X(L) Series - Manual (Page 4)

Quick Start Guide
- 2 -
Hardware Overview
The Front LEDs
The Rear Ports
Connect the
supplied power
adapter to this jack
Connect the supplied
RJ-11 cable to this port
when connecting to the
ADSL/telephone
network
Connect your computer
to a LAN port, using the
included Ethernet cable Connect the
detachable antenna
Lit when connected to
an Ethernet device.
Green for 100Mbps;
Orange for 10Mbps.
Blinking when data is
Transmitted / Received
Lit green when IP connected.
Flashes green when IP connected and
IP traffic is passing thru the device.
Lit red when device attempted to
become IP connected and failed
Lit when power is ON.
Lit red when POST
(Power On Self Test)
failure (not bootable) or
device malfunctions
Lit green when the wireless
connection is made.
Flashes when sending/receiving data.
Flashes regularly when WPS is active
Lit green when
successfully
connected to an
ADSL DSLAM
(“line sync”)
Lit and
flashed
periodically
when there is
email in the
Inbox
Press it to reset the
device or restore to
factory default
settings
Push WPS button to
trigger Wi-Fi Protected
Setup
BiPAC 7402X(L) does not support 802.11g and WPS functions.
Power ON/
OFF switch
3G/ HSDPA USB
modem backup
for Internet
Lit green when the
USB device is ready.
Flashes when
sending/ receiving
data.