Philips ErgoFit Beutelloser Staubsauger - Manual (Page 18)

8 Reattach the top of the filter cover (1) and then close the cover
(2) (‘click’).
replacement
Batteries of remote control
1 Replace the batteries when the light on top of the remote control
does not flash when you press any button.
Note: Your remote control may differ from the one shown in the figure.
2 Follow steps 1 to 3 in chapter ‘Before first use’.
storage
Note: Before you store the appliance, always make sure you have cleaned the
filter cylinder by pressing the AutoClean button (specific types only) or with
the filter-cleaning handle (specific types only). See section ‘Cleaning the filter
cylinder’ in chapter ‘Using the appliance’.
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the mains cord.
3 Adjust the telescopic tube to the shortest length.
English
18