Belkin 8820AU00398 - Manual (Page 5)

5
GETTING STARTED
1. Connect your Router’s ADSL cable to your ADSL connection.
If you are replacing an existing Router or gateway, this may
require unplugging the existing gateway.
Note: If a telephone is connected to the same telephone jack
then an ADSL Splitter/Filter is required.This can be
purchased from your local retailer.
2. Plug the Router’s power supply into a wall outlet.
3. Put the CD into your computer. If the CD doesn’t
open automatically, please browse to your CD drive
and double-click on the Belkin Setup CD icon.
4. Click the Setup icon on the CD menu.
Setup