Buhler Farm king FK366 - Manual (Page 29)

45 Series Rotary Tiller
26
BOLT TORQUE
CHECKING BOLT TORQUE
The tables shown below give correct torque values for various bolts and cap screws.
Tighten all bolts to the torques specified in chart unless otherwise noted. Check
tightness of bolts periodically, using bolt torque chart as a guide. Replace hardware
with the same strength bolt.
ENGLISH TORQUE SPECIFICATIONS
Bolt Bolt Torque *
Diameter SAE2 SAE 5 SAE 8
"A" N.m (lb-ft) N.m (lb-ft) N.m (lb-ft)
¼” 8 (6) 12 (9) 17 (12)
5/16"
13 (10) 25 (19) 36 (27)
3/8" 27 (20) 45 (33) 63 (45)
7/16" 41 (30) 72 (53) 100 (75)
½” 61 (45) 110 (80) 155 (115)
9/16"
95 (70) 155 (115) 220 (165)
5/8” 128 (95) 215 (160) 305 (220)
¾” 225 (165) 390 (290) 540 (400)
7/8" 230 (170) 570 (420) 880 (650)
1" 345 (225) 850 (630) 1320 (970)
Torque figures indicated above are valid for non-greased or non-oiled threads and
heads unless otherwise specified. Therefore, do not grease or oil bolts or cap screws
unless otherwise specified in this manual. When using locking elements, increase
torque values by 5%.
* Torque value for bolts and cap screws are identified by their head markings.