End of message, press 1 to replay the messages, No messages, You have x messages – BT 106 User Manual
Page 25: Time/date announcement
23
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
At the end of your message, the voice
announces
“End of message, press 1
to replay the messages”
.
1
Press
1
to replay or hang-up to exit.
Accessing the Answering
Machine or Call Director from
another telephone
You can call your Ultimate 106 from an outside
telephone to operate the answering machine or to
access messages in your individual Call Director
voice mailbox.
You need a 4-digit PIN number to access the
Answering Machine.
In program mode.
31#
Enter this code using extension 11..
KEYPAD
Enter a 4 digit PIN code of your choice
(exclude
✱
, # keys).
#
To confirm.
34#
Enter this code.
Your Ultimate 106 announces
“Please
hold the line, you have 30 minutes of
record time remaining”
.
If new messages have been received,
when you lift any handset the dialtone
changes to a higher pitch. The LED on
the Ultimate 106 will also be illuminated.
7
Press
7
to play your messages. If you
have no messages your Ultimate 106 will
announce
“No messages”
, otherwise it
will announce
“You have X messages”
the message will then be played.
During message playback:
90
To delete the current message.
91
To go back to the previous message.
92
To repeat the current message.
93
To skip to the next message.
95
To dial the number that the call came
from (only if Caller Display is activated
and number available).
96
To speak the number (or name) that
the call came from (only if Caller Display
is activated).
9#
To skip to the end of
“Time/date
announcement”
and go straight to the
message.
To hear how much recording time
is remaining
To program your PIN
To replay Answering Machine or
Call Director voice-mail messages
PLEASE NOTE
The above menu selections must be pressed during
playback at a message in order to activate the
function.