Blaupunkt CD33 - Manual (Page 11)

32
Radio mode
This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as it is received.
Switching to radio mode
If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,
➮
press the BND•TS button
<
.
Or
➮
keep pressing the SRC button
6
until “RADIO” appears in the dis-
play.
RDS functions (AF, REG)
The RDS functions AF (Alternative Fre-
quency) and REG (Regional) extend
your radio’s range of functions.
●
AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
●
REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different regional content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
transmitting different programme
content.
Note:
●
REG must be separately activated/
deactivated in the menu.
Switching REG on/off
➮
Press the MENU button
7
.
➮
Keep pressing the or button
5
until “REG” appears in the dis-
play.
“OFF” or “ON” is displayed alongside
“REG”.
To switch REG on/off,
➮
press the or button
5
.
➮
Press the MENU button
7
.
Switching the RDS function on/off
To use the RDS functions (AF and
REG),
➮
press the TRAF•RDS button
;
for
longer than two seconds.
The RDS functions are active when
RDS lights up in the display.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM, MW and LW
wavebands.
Note:
●
The MW and LW wavebands are
not available on the Essen CD33.
There are three memory banks for the
FM range and one for each of the MW
and LW wavebands.
Six stations can be stored in each mem-
ory bank.
RADIO MODE