Barco MDRC-2124 - Manual (Page 23)

23
6. To change an adjustment value or setting, swivel the control
wheel to select the adjustment or setting. Next, press the
control wheel to go into edit mode. This is indicated by the
trackbar turning dashed. Swivel the control wheel to change
the value. Press the control wheel to confirm the change.
For multiple choice options, the currently selected option is
indicated by a “V”.
OSD menus overview
Input selection menu
Name Description
Auto Select this setting if you wish the display to
select the video input automatically.
DisplayPort Select this setting if you wish the display to
select the digital video input on the DisplayPort
connector.
DVI Digital Select this setting if you wish the display to
select the digital video input on the DVI
connector.
DVI Analog Select this setting if you wish the display to
select the analog video input on the DVI
connector.