Philips Satinelle Ice Premium Epilierer - Manual (Page 17)

Problem Possible cause Solution
The leg skin
cooler did not
touch the skin.
Make sure the skin cooler is always
in proper contact with your skin
during epilation. Only use the leg
skin cooler to epilate your legs.
The pivoting
cooling head of
the leg skin
cooler does
not move.
The pivoting
cooling head is
frozen.
Pass the skin cooler over your leg
a few times to make it pivot again.
Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
It is not
possible to
remove the
epilating head.
You did not
press the
release button.
Press the release button and pull
the epilating head off the appliance.
HP6515 only: It
is not possible
to remove the
shaving head.
You did not
press the
release button.
Press the release button and pull
the shaving head off the appliance.
HP6515 only:
Reduced
shaving
performance.
The shaving
head is dirty.
Switch off the appliance, unplug it
and remove the shaving head. Then
clean the cutter unit and the
shaving head with the cleaning
brush supplied. Remove any hairs
that are stuck under the trimmers.
The cutter unit
is damaged or
worn.
Replace the cutter unit.
HP6515 only:
Stronger skin
irritation than
usual after
shaving.
The cutter unit
is damaged or
worn.
Replace the cutter unit.
EnglisH 17