Britax MARATHON 70 - Manual (Page 48)

46
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow and
unbuckle the harness.
3 Pull the head pad up, then pull
the cover forward to access the
forward-facing belt path.
4 Open the red lock-off closest to
where the vehicle belt will be
buckled.
a Open the locking tab
b Open the clamp
5 Route the vehicle belt through
the forward-facing belt slots, then
buckle. Ensure the vehicle belt is
not twisted.
6 Push down into the rear of the
child seating area with moderate
force while removing all slack from
the bottom (lap) part of the vehicle
belt and close the lock-off.
a Close the clamp over the vehicle belt
b Slide your palm or thumb along the
locking tab until a click is heard (see
page 19)
7 Push the child seat down while
pulling the top (shoulder) part of
the belt between the belt slots
to remove any remaining slack
through the lock-off.
8 Attach and remove slack from the
Versa-Tether (if an anchor point is
available).
Forward-Facing Installation
1b
1a
LOCKING
TAB
CLAMP
4a
4b
5
7