Bushnell 111026 User Manual
Page 15
15
Binocular instructions
How to Adjust For Individual Eye Strength
As individual eyesight varies from one person to another, most Bushnell binoculars have a
diopter setting feature which allows you to fine-tune the binocular to your vision. Follow
the focusing instructions below for your type of binocular.
FOCUSING
Adjust interpupillary distance. (
1.
Figure 1)
Set the “diopter setting” (
2.
Figure 2) to zero and view a distant object.
Keep both eyes open at all times.
3.
Using a lens cover or your hand, cover the objective (front) lens of the same side of
4.
the binocular that has the “diopter setting.” this is usually the right side. (the left side
on zoom models.)
Using the center focus wheel, focus on a distant object with
5.
fine detail (e.g., brick wall, tree branches, etc.) until it appears
as sharp as possible.
Uncover the objective lens on the diopter side, cover the
6.
other objective lens, then view the same object.
Using the “diopter setting” adjustment ring, focus the same
7.
object being viewed. Caution should be used as over turning
or forcing the diopter eyepiece can cause damage or cause the eyepiece to break
away from the chassis.
Your binocular should be adjusted for your eyes. Focus at any far or near distances
8.
can now be attained simply by turning the center focus wheel. Make a note of the
DiOPtER SEttiNG
Fig. 2