Cleaning the epilating head, Cleaning and maintenance, Environment – Philips Epilierer User Manual

Page 10

Advertising
background image



Place the appliance perpendicularly onto the skin with the on/off

slide pointing in the direction in which you are going to move the

appliance (Fig. 10).

5

Move the appliance slowly over the skin, against the direction of

the hair growth (Fig. 11).

Epilate your bikini line as shown in the figure (Fig. 15).

Epilate your underarms as shown in the figure (Fig. 16).

6

For a cool sensation, you can dab the area you have just epilated

with a cloth soaked in cold water.

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the appliance.

Never rinse the appliance or the adapter under the tap (Fig. 17).

Keep the appliance and the adapter dry (Fig. 18).
cleaning the epilating head

1

Switch off the appliance, remove the adapter from the wall socket

and pull the appliance plug out of the appliance (Fig. 19).



Remove the epilating head (Fig. 0).



Remove loose hairs with the brush supplied (Fig. 1).



Rinse the epilating head under the tap for 5-10 seconds while

turning it (Fig. ).

5

Shake the epilating head firmly and dry it thoroughly with a tea

towel. (Fig. )

Note: Make sure the epilating head is dry before you place it back onto the

appliance.

Environment

Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an official collection point for

,

,

-

-

-

EnglisH

10

Advertising
This manual is related to the following products: