Brother DCP-9045CDN - Manual (Page 176)

Scanning
169
9
Changing the default file name
9
a For MFC-9440CN and MFC-9840CDW, press Menu, 5, 2, 2.
For DCP-9045CDN, press Menu, 4, 2, 2.
b Enter the file name (up to 6 characters.)
Press OK.
Note
You cannot use a space for the first character.
c Press Stop/Exit.
Understanding the Error Messages
9
Once you are familiar with the types of errors that can occur while you are using the Scan to USB,
you can easily identify and troubleshoot any problems.
„ Protected Device
This message will appear if the protect switch of the USB flash memory drive is on.
„ Rename the File
This message will appear if there is already a file on the USB flash memory drive with the same name as
the file you are trying to save.
„ Too Many Files
This message will appear if there are too many files stored on the USB flash memory drive.
„ Unusable Device
This message will appear if your USB flash memory drive is not supported by your Brother machine.